DOT Metal Products

Each of Dot Metals’ products are designed and fabricated to the greatest level of integrity.

Call Us Today 855-213-6804

  • Home
  • Products
    • Construction Hardware
      • Pier Caps
      • Cavity Caps
      • Bar Ties
      • Bar Tie Tool
      • Wall Tie
      • Termite Shield
      • Insulation Support Wire
    • Drywall Corner Bead Products
      • Drywall Corner Bead
      • Bullnose Corner Bead
      • Arched Corner Bead
      • J Beads
      • L Beads
    • Siding & Soffit Products
      • H Mold Joint Covers
      • Lap Siding Starter Strip
      • H Molding
      • Mobile Home Skirting
    • Gutter Protection
      • Screen-Mesh
      • Gutter Helmet®
      • Clean Mesh
    • Metal Roofing
      • 5V Crimp
      • Corrugated
      • SM-Rib
      • Metal Roofing FAQ
      • Skylight Panels
    • Steel Framing
      • Diamond Steel Framing Track
      • Diamond Steel Framing Stud
      • Furring Channel
    • Ventilation Products
      • Aluminum Soffit Strip
      • Bullet Boot
      • Universal Ridge Vent (RV 10)
      • Foundation Vents
      • Louvers
      • Off Ridge Vents
      • Gooseneck Vent
      • Roof Jack
    • Stucco and Plaster Products
      • Casing Bead
      • Expanded Corner Bead
      • Inside Corner
      • Metal Lath
      • Corner Bead
      • Expansion Joint
    • Trims & Flashings
      • Angle Flashing
      • Apron Flashing
      • Apron/Dormer Flashing
      • Counter Flashing
      • Drip Cap/Head/Special Flashing
      • Eave Drip
      • Gutter Apron
      • Modified Roof Edge / Gravel Guard
      • Ridge Roll
      • Roll Valley
      • Roof Edge
      • Shingle Flat
      • Step Flashing
      • Stucco Flashing
      • Style D Type L Roof Edge
      • Turnback Flashing
      • Valley – “W” and “V”
      • Water Diverter
      • Window Flashing
      • Z Flashing
    • Safety Equipment
      • Roof Top Safety Kit
      • Vertical Lifeline
      • Anchors
      • Shock Absorbing Lanyard
      • Universal Fit Harness
  • Technical Data
    • Spec Information
    • Product Approval Numbers & NOA
    • Organizations
    • AutoCad
  • Literature
  • About Us
    • Mission Statement
  • Blog
  • Contact Us
  • En Español
  • Facebook
  • Twitter
  • Google Plus

    Get in Touch

    * All fields required
    Privacy Policy

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    FAQ You Should Know about Bullet Boot

    January 20, 2016 By Magan Jenkins

    What is Bullet Boot?

    Bullet BootBullet Boot is a one-piece flexible rubber boot and plumbing vent sleeve used as a terminal vent pipe roof flashing. It installs directly over standard PVC pipe.

    What does a pipe boot do?

    A pipe boot fits over a plumbing vent pipe to keep rain from running down the side of the pipe and into a home, causing water damage. It also prevents debris and small animals from entering the plumbing vent. [Read more…]

    Filed Under: Products

    FAQ You Should Know about Screen Mesh® & Clean Mesh®

    January 7, 2016 By Magan Jenkins

    Screen Mesh


    What is a gutter screen and what does it do?

    Screen MeshA gutter screen is a type of gutter protection system that allows water to flow into a gutter while keeping out leaves and debris. Because debris isn’t able to get into gutters and potentially cause clogs, homeowners don’t have to deal with gutter cleaning as often. Depending on the brand, a gutter screen can be made from metal or plastic.

    [Read more…]

    Filed Under: Products

    FAQ You Should Know about Total JACK®

    December 15, 2015 By Magan Jenkins

    Total Jack roof jack

    p2-TotalRoofJack-SalesSht-8-5x11-236x300What does a roof jack do?

    A roof jack is a metal stack that fits over a vent pipe and extends upward from the roof. Its purpose is to keep rain and debris out of the structure and prevent water from getting under the roofing material.

    Why was Total JACK® invented?

    DOT Metal Products®, A Gibraltar Industries Company saw a need in the roofing industry for a solution to the continued dilemma of the wrong roof jacks being sent to job sites. Total JACK® eliminates the need for multiple jack sizes because it fits almost every roof pitch. [Read more…]

    Filed Under: Products

    Metal Roofing: A Simple Way to “Go Green”

    October 14, 2015 By Magan Jenkins

    Did you know that metal roofing from DOT Metals® is the most environmentally-friendly roof you can buy? Approximately 11 million tons of asphalt shingles are discarded in U.S. landfills each year, yet there is no need to discard metal roofing! Whether or not you are familiar with metal roofing, take a look at the reasons for the growing popularity and versatility of this “green” product. [Read more…]

    Filed Under: Products

    Don’t Just Repair; Improve Gutters with Screen Mesh® & Clean Mesh®

    August 18, 2015 By Magan Jenkins

    Screen Mesh

    Screen MeshStuck weather patterns this spring kept storm after storm moving across parts of the Gulf Coast from Texas to the Florida Panhandle. CNN reports that for the first time ever, an average of 4.36 inches of rain fell on the continental United States in May alone – 1.45 inches above the long-term average. Our friends in Oklahoma and Texas were especially hard-hit, where the rain that fell was almost twice the average and the most ever in any month. [Read more…]

    Filed Under: Products

    Texas Contractors, Total JACK® Simplifies Rebuilding After Flooding

    July 2, 2015 By Magan Jenkins

    DOT Metals® extends heartfelt condolences to all who have been affected by severe flooding throughout Texas in recent weeks. Emergency management officials report that in Hays County alone, more than 1,000 homes have been either destroyed or sustained some degree of damage due to record-breaking flooding over Memorial Day weekend. Hays County is located in Central Texas, just south of Austin. [Read more…]

    Filed Under: Products

    Traditional Roof JACK vs. Total JACK®: Comparing Form & Function

    June 18, 2015 By Magan Jenkins

    Total Jack roof jack

    Roof jacks are used to prevent rain, snow and debris from entering a home through attic ventilation and vent pipes that exhaust kitchen and bath fans. The galvanized steel construction of a traditional roof jack provides durability, while the vent cap keeps out water. [Read more…]

    Filed Under: Products

    Bullet Boot: A Better Alternative to Lead

    June 4, 2015 By Magan Jenkins

    Brown_Bullet_BootGive leaks and lead the “BOOT” with Bullet Boot, an innovative pipe flashing provided by DOT Metals®. Bullet Boot is a one-piece flexible rubber boot and plumbing vent sleeve used as a terminal vent pipe roof flashing. Dangerous lead flashing has commonly been used around vent pipes and roof drains because it is pliable and can withstand hot temperatures. Bullet Boot is just as tough and eliminates the need for these environmentally hazardous lead pipe boots. [Read more…]

    Filed Under: Products

    Metal Ventilation Products Keep Homes Safe & Healthy

    May 26, 2015 By Magan Jenkins

    Universal Ridge Vent

    The importance of a suitable roof ventilation system can’t be overemphasized. Every ventilation system functions by drawing fresh outside air through intake vents located on the lower roof and exhaling stale air through vents located on the upper roof. For this exchange of air to work well, there has to be a balance between the amount of air intake and exhaust – the amounts should be equal or the volume of air intake greater than the exhaust. The general rule of thumb is one square foot of attic ventilation for every 300 square feet of attic space. [Read more…]

    Filed Under: Products, Tips

    DOT Metals® Product Highlight: Roof Edge Flashing

    April 30, 2015 By Magan Jenkins

    Roof Edge GZ

    DOT Metal Products® produces all the metal supplies you need to finish a building project, including a full line of metal trims and flashing in a variety of substrates, profiles and finishes. These easy-to-install product offerings are extremely effective at guiding water away from the roof and creating a professional finish.

    Roof Edge GZInstalled along the edge of the roof, roof edge flashing protects against water infiltration that results in leaks and rot. [Read more…]

    Filed Under: Products

    • 1
    • 2
    • Next Page »

    Oklahoma, Kansas, New Mexico, Missouri, West Texas, North West Texas, North East Arkansas
    Tom Field, 405-812-7656

    North East Arkansas and Texas
    J Capps 817-709-9059
    Richard Crossland 817-228-1503
    Robert Curtis 817-996-9766

    South West Arkansas
    Clif Palmer, 601-832-4272

    Louisiana
    Hugh Daschbach, 985-215-9056

    Metal Roof Systems | Metal Roof Products | Technical Data | Literature | News | About Us | Sitemap | Email
    © Copyright DOT Metal Products.
    Southeastern Metals Manufacturing Company, Inc. (d/b/a DOT Metal Products). All rights reserved.
    San Antonio Office:18757 Bracken Drive | San Antonio, Texas 78266 | Ph: 855 213 6804 | Ph: 210 651 6331 | Fax: 210 507 6757



    Energy Star Partner    CRRC